User guide

Configuring Users
180
Configuring Users
Thefollowingcommandsprovidedtheadministra torswiththeabilityto
managerusers:
• addgroup
• adduser
• deletegroup
• deleteuser
• editgroup
• edituser
• groups
• users
Addgroup Command
Theaddgroupcommandcreatesagroupwithcommonpermissions.
Thesyntaxoftheaddgroupcommandis:
addgroup [name groupname] [class <op|ob>] [ports
<number|range|*>] [power <number|range|*>] [sharing
<true|false>]
Theaddgroupcommandoptionsaredescribedinthefollowingtable.
Command Description
namegroupname Groupname
class<op|ob> Groupuserclass<op>eratoror<ob>server
ports<number|range|*> Port(s)assignedtothegroup.Singleportor
rangeofports(1‐nor1,3,4or*forallports)
power
<number|range|*>
Powerstripassignedtothegroup.Single
powerstriporrangeofpowerstrips.
sharing<true|false> Indicatewhetherusersinthegroupare
allowedtoaccessaportthatalreadyhas
usersconnectedtoitiftheportaccessmode
issettoShare.
Command Example
admin > Config > User > addgroup name unixgroup class op
ports 1,2,3 power 1,2,3