User guide

Chapter 13: Command Line Interface
179
NTP Command
ThentpcommandletstheadministratordetermineifaNetworkTime
Protocol(NTP)servershouldbeusedtosynchronizetheSXclocktoa
reference.
Thesyntaxofthecommandis:
ntp [enable <true | false>] [primip primip] [secip secip]
Thecommandoptionsaredescribedinthefollowingtable.
Command Description
enable EnableordisabletheuseofNTP.
primip
primip
TheprimaryNTPservertousefirst.
secipsecip TheNTPservertouseiftheprimaryisnot
available.
Command Example
ThefollowingexampleenablesNTP.
admin > Config > Time > ntp enable true primip
132.163.4.101

Timezonelist Command
Thetimezonelistcommandreturnsalistoftimezonesandassociated
indexvalues.Theindexvaluesarethenusedaspartoftheclock
command.
Thesyntaxofthecommandis:
timezonelist