User guide

Chapter 13: Command Line Interface
175
SSH Command
Thesyntaxofthesshcommandis:
ssh [enable <true|false>] [port value]
Thesshcommandoptionsaredescribedinthefollowingtable.
Command Description
enable<true|false> EnableordisableSSHaccess.
portvalue SSHservertcplistenport
SSH Command Example
admin > Config > Services > ssh enable true port 4
Thesystemdisplaysthismessageafterenteringtheprecedingcommand.
Thesystemwillneedtoberebootedforchangestotakeeffect.
Telnet Command
Thesyntaxofthetelnetcommandis:
telnet [enable <true|false>] [port value]
Thetelnetcommandoptionsaredescribedinthefollowingtable.
Command Description
enable<true|false> EnableordisableTelnetaccess.
portvalue Telnetservertcplistenport
Telnet Command Example
Thecommandbelowenablestelnetaccessonport23.
admin > Config > Services > telnet enable true port 23
