User guide

Configuring Services
174
HTTPS Command Example
admin > Config > Services > https

Https Settings:
Enabled : true
Port : 443
Logout Command
ThelogoutcommandisusedtologoutofthecurrentCLIsession.
Youcanlogoutatanycommandlevel.
LPA Command
Thelpacommandisusedtodisplayandsetthelocalportaccess
configuration.DominionSXunitshaveoneortwolocalports,depending
onthemodel.(InsertreferencetoAppendixA(seeʺDominionSXSeria
l
RJ‐45Pino
utsʺonpage251)forthepinoutsfo
rDB9‐MandRJ45‐Fports):
Thesyntaxofthelpacommandis:
lpa [enable <true|false>] [bps value]
Thelpacommandoptionsaredescribedinthefollowingtable.
Command option Description
none Thelpacommandwithnoparameters
specifieddisplaysthecurrentLPA
configuration.
enable<true|false> enableEnable/DisableLocalPortaccess
[bpsvalue] LocalPortspeed(bitrate)inbit/s.Possible
valuesare:
(9600|19200|38400|57600|115200)
LPA Command Example
Thefollowingcommandenableslocalportaccessandsetsthebaudrate.
admin > Config > Services > lpa enable true 115200
