User guide

Configuring Services
172
Ifoptionsuppressisʺnoneʺ,authenticationcredentialsareshown
(username:password:).
configuration > ports > config port 1 suppress none
ssh -l Anonymous 10.0.13.240
Password:
Authentication successful.
Starting DPA for port 1
Authentication successful.
Escape Sequence is: Control-]
Youarenowmasterfortheport.
Encryption Command
TheencryptioncommandsetsthetypeofencryptionforHTTPS.
Note:ThefactorydefaultvalueofthisprotocolisSSL.
Thesyntaxoftheencryptioncommandis:
encryption [prot <TLS|SSL>]
Theencryptioncommandoptionsaredescribedinthefollowingtable.
Command Description
prot<TLS|SSL> SelectTLSorSSLencryption
Encryption Command Example
ThefollowingexamplesetsSSLencryptionforHTTPS.
admin > Config > Services > encryption prot SSL
