User guide

Chapter 13: Command Line Interface
167
Inbothcasesabove,port1willhavesshport7000andtelnetport
8000assignedfordirectportaccess,port2willhavesshport7001and
telnetport8001,andetc.

OtherDPATCPPortoptions:
config <port *> <ssh tcpport>
config <port portnumber> <ssh tcpport>
config <port port_range> <ssh tcpport>
config <port *> <telnet tcpport>
config <port portnumber> <telnet tcpport>
config <port port_range> <telnet base_tcpport>

Forconfiguringallportsusingablockofcontiguousportnumbers,<p
ort
*>comm
andcanbeused.Ifport_rangeisspecified,thenablockof
contiguousportnumberswillbeused.Thegivenvalueofbase_tcpportis
usedasstartingvalue.Forindividualportconfiguration,the<port
portnumber>commandcanbeused.
Ports Keywordadd Command
Keywordscanbeconfiguredperport.Afterakeywordisconfiguredfora
port,anSMTPnotification,ifthecorrespondingeventisselectedfor
notification,issentupondetectingthiskeywordinthedatacomingfrom
thetargetconnectedtotheport.
Thesyntaxofthekeywordaddcommandis:
keywordadd [port <number|range|*>] [keyword value]
Command Example
admin > ports > keywordadd port 1 keyword ll
