User guide

Configuring Modem
154
Modem Menu Command Examples
admin > Config > modem > dialin enable true serverip
10.0.13.211 clientip 10.0.13.212
admin > Config > modem > dialback enable true
admin > Config> modem > show modem

Modem Settings:
Dialin Enabled: 1
Server IP : 10.0.13.211
Client IP : 10.0.13.212
Dialback : Enabled
Dialback with local user
Beforea modemconnectioncanbeestablished,thelocaluserthatisgoing
tobeusedfordialinauthenticationshouldbeconfigured.Anewusercan
beaddedoranexistingonecouldbereconfiguredwithacorrectdialback.
Anexampleconfigureduser(Dialbacknumberis129)shouldhavethe
followingsett
ings:
User Settings:
Login : Modem
Name : Dialback
Info: SX
Dialback: 129
Group :Admin
Active : 1
Whenthi
sconfigurationisset,themodemconnectioncanbeestablished.
Theusermayusevarioustypesofmodemdial‐upclientstoaccomplisha
successfulmodemconnectiontotheSXdevice.
Dialback with remote Radius user (Cistron Radius v1.6.7)
DialinandDialbackshouldbeenabledonthedeviceusedformodem
communication.Primary(or/andSecondary)RADIUSServerSettings
shouldbeconfiguredcorrectlyandenabledontheSXdevice:
admin > Config > Authentication > RADIUS > primaryradius
RADIUS Server Settings
----------------------------------------