User guide
Configuring Log
150
keystring Providekeystringtobeusedfor
encryption
Note:aes128isnotsupportedin3.0.
Command Example
admin > Config > Log > nfssetkey type aes128 key
D2F05B5ED6144138CAB920CD
NFS Encryption Enable Command
Enableportloggingandencryptionofdata:
admin > Config > Log > portlog enable true encrypt true
Portlog Command
Theportlogcommandenablesandconfigurestheloggingofportdata.
Thesyntaxoftheportlogcommandis:
portlog [enable <true|false>] [prefix name] [size value]
[timestamp interval] [update interval] [inputlog
<true|false>] [indir name] [outdir name] [encrypt
<true|false>] [block <true|false>]
Theportlogcommandoptionsaredescribedinthefollowingtable.
Command Description
enable<true|false> Enable/Disableloggingofportdatato
remoteNFSserver.
prefixname Prefixforlogfilename.
sizevalue MaximumSize(inbytes)forthelogfile.
timestampinterval Timeinterval(inseconds)betweentwo
timestampsinthelogfile.Avalueof0will
disabletimestamplogging.Thedefault
valueis20.Themaxvalueis99999.
updateinterval Timeinterval(inseconds)betweentwo
updatestotheremotelogfileThedefault
intervalis20.Themaxvalueis99999.