User guide

Chapter 13: Command Line Interface
149
Eventsyslog Command Example
admin > Config > Log > eventsyslog enable true primip
192.168.134.11 secip 192.168.245.11

nfsgetkey Command
ThenfsgetkeycommandgetsanNFSencryptionkeytobeusedfor
encryptingportlogdata.Usethekeyvalueasinputtothenfssetkey
command.
Thesyntaxofthenfsgetcommandis:
nfsgetkey [type <rc4|aes128>]
Thenfsgetkeycommandoptionsaredescribedinthefollowingtable.
Command Description
type<rc4|aes128> Typeofencryptionkeyusedfor
encryption(rc4oraes128)
nfsgetkey Command Example
admin > Config > Log > nfsgetkey type aes128

nfssetkey Command
Thenfssetkeycommandsetsthetypeofencryptionandthekey.NFSis
notoriouslyinsecure.Itcanbeaccessedeasilyandthedatamisused.With
DominionSX,theadministratorhastheabilitytoencryptthedatastored
ontheNFSserver.Consequently,ifthedataweretobeaccessed
inappropriately,itwo
uldbeofnous
etoanyonewithouttheencryption
keyusedtoencrypt.
ThekeycanbesetandobtainedfromtheDSXonly.
Thesyntaxofthenfssetkeycommandis:
nfssetkey [type <rc4|aes128>] [key string]
Thenfssetkeycommandoptionsaredescribedinthefollowingtable.
Command Description
type<rc4|aes128> Typeofencryptiontypetobeused