User guide

Initial Configuration
136
KernelVersion:2.4.12
PMONVersion:2.0.1
RSCVersion:1.0.0.1.16
Supportingsoftware:
 OpenSSH_4.3p2, OpenSSL 0.9.7i 14 Oct 2005
HTTP Server version: Apache/2.2.0
HTTP Server built: Mar 29 2006 16:06:30
TELNET Linux NetKit 0.17
Initial Configuration
DominionSXunitscomefromthefactorywithdefaultfactorysettings.
Whenyoufirstpowerupandconnecttotheunit,youmustsetthe
followingbasicparameterssothedevicecanbeaccessedsecurelyfrom
thenetwork:
1. Resettheadministratorpassword.
AllDominionSXunitsareshippedwiththesamedefaultp
a
ssword;
therefore,toavoidsecuritybreachesitisimperativethatyouchange
theadminpasswordfrom“raritan”toonecustomizedforthe
administratorswhowillmanagetheDominionSXdevice.
2. AssigntheIPaddress,subnetmask,gatewayIPaddresstoallow
remoteaccess.
3. Setthetimeanddate
.
After
theprecedingparametersareset,therestofthesystem
configurationcanbeperformed.
Setting Parameters
Tosetparameterstheusermustbeloggedonwithadministrative
privileges.Atthetopleveltheuserwillseethe"Username" >prompt,
whichfortheinitialconfigurationis"admin" >.Enterthetopcommand
toreturntothetopmenulevel.
Note:Iftheuserhasloggedonwithad
ifferentus
ername,thatusername
willappearinsteadofadmin.