User guide

Chapter 10: Logging
109
2. GototheSNMPSettingpanelandclicktheEnableSNMPcheckbox
toenabletheSNMPfeature.

3. TypeanSNMPpubliccommunityinthePublicCommunityfield.
ThedefaultisPublic.Thepubliccommunitydetermineswhich
SNMPmanagementstationsreceiveSNMPalerts.
4. ClickOK.
Create a New SNMP Destination
SNMPdestinationsdeterminewhichSNMPmanagementstationsreceive
SNMPtraps.TocreateanewSNMPdestination:
1. GotheSNMPDestinationpanelandtypetheIPaddressofthenew
destinationintheIPAddressfield.

2. Bydefault,thenewdestinationwillusethestandardSNMPportof
162.Youcanchangethistoanotherport,ifyouwish,byenteringa
differentportnumberinthePortfield.
3. ClickOK.
Note:TodisplaytheSNMPManagementInformationBase(MIB),
clicktheViewSNMP‐MIBlinkintheSNMPSettingsPanel(asshown
inEnableSNMPLogging(onpage108)section).