User guide

Configuring SNMP Logging
108
Youmustalsoenableportlogging.Formoreinformationonportlogging,
see“EnablePortLogging” above.
Note:TheNFSservermusthavetheexporteddirectorywithwrite
permissionfortheportloggingtowork.
ToconfigureNFSLogging:
1. ChooseSetup>NFS.TheNFSSettingsscreenappears.

2. ClicktheEnableNFScheckboxtoenableNFSlogging.
3. TypetheIPaddressoftheNFSserverinthePrimaryIPfield,and
thenenterthepathtothelogfileinthePrimaryDirectoryfield.
4. IfyouhaveabackupNFSserver,enterthesameinformationforthis
serverintheSecond
aryIPfie
ldandSecondaryDirectoryfields.Ifthe
primaryserverfails,portloggingisredirectedtothesecondary
server.
5. ClickOK.
Configuring SNMP Logging
TheDSXsupportsSimpleNetworkManagementProtocol(SNMP)traps
andlogging.
Enable SNMP Logging
ToenableSNMPlogging:
1. ChooseSetup>SNMP.TheSNMPscreenappears.