User guide

Chapter 10: Logging
107
2. TypetheemailaddresstosendtheeventintheDestinationfield.
3. ClickOK.
Test the SMTP Logging
ItisimportantthattheSMTPserverinformationbeaccuratesothatthe
DominionSXunitcansendmessagesusingthatSMTPserver.
Toverifythattheinformationiscorrectandworking:
1. Sendatestemailbyselectinganeventsuchas:
event.amp.notice.portconnection
2. Connecttoaportandseeifthemessageisreceived
bytheintended
emailtarget.Ifthereareproblems,contactyourSMTPadministrator
tomakesureyourSMTPserverIPaddressandauthorization
informationarecorrect.
Configuring NFS Logging
NetworkFileSystem(NFS)loggingallowsyoutologallportactivityto
anNFSshareddirectory.Alluseractivityanduserportloginsand
logoutsarelogged.Therearetwologfiles:
 Input:Recordsallinput(keystrokes)fromusers.
 Output:Containsallthemessagesthatcomefromtheserverint
o
theconsolese
rver.Thisincludesalluserinputthatisechoed
backfromthemanageddevice/server.