User guide

Configuring Local Event Logging
104
Configure Input Port Logging
Toenableinputportlogging:
1. GototheInputPortLoggingpanelandclicktheEnableInputPort
Loggingcheckbox.(Toturnthisfeatureoff,clearthischeckbox.)

2. TypeadirectoryforinputintheInDirectoryfield.
3. ClickOK.
Configuring Encryption
Toconfigureencryption:
1. GototheEncryptionpanelandclicktheEncryptioncheckbox.(To
turnthisfeatureoff,clearthischeckbox.)

2. AcceptthedefaultencryptionkeyortypeanewoneintheNFS
EncryptionKey(RC4)field.
3. ClickOK.
Block Port Access On Failure
ThisfeaturewillspecifyNFSmountbehavior.Thisfeatureappearsas
checkedbydefault,andNFSbehavesasasoftmount.Whenitisasoft
mount,NFSwillbere‐mountedifanoperationgoeswrongonthefile
system.Ifthere‐mountsucceeds,loggingwillcontinue;otherwise,
furtherlog
gingeventswi
llbeinhibited.
