User guide

Chapter 9: Security
85
 InvalidLoginRetries:3
 LockoutPeriodonInvalidLogin(minutes):5
3. Acceptthesystemdefaultsortypeyourown.

Login Handling
1. GototheLoginHandlingpanelandenteravalueintheUserIdle
Timeout(minutes)field.Thisisthelengthofinactivetime,after
whichtheuseristimedout.Defaultissetto10(minutes).
2. Toenablesingleloginonly,clicktheSingleLoginperUsercheckbox.
Onlyoneus
ercanloginatati
meusingthesameprofile.
3. ClicktheAnonymousPortAccesscheckboxtoturnthisfeatureon.
AnAnonymousUserGroupiscreatedbydefaultanditcanʹtbe
deletedevenbytheAdministrator.Itisvisible/notvisibleinGroup
ListifAnonymousPo
rtAc
cessisunchecked/checked.
Note:RefertoPortConfigurationandPortAccessApplication(on
page46)chapterforadditionalinformationaboutanonymousport
access.
4. Indicatewhetherportaccessshouldbesharedorprivate,allowingor
disallowinguserstoconnecttotheportwhileanotheruseris
utilizingit.ThedefaultvalueissettoShare.Changebyselecting
Privatefromthedrop‐downmenu.
Strong Password Settings
Toenablestrongpasswords,gototheStrongPasswordpanelandselect
therequirementsforastrongpassword.Thisincludesmaximumand
minimumlengthandspecialcharacterrequirements.
