User guide

Chapter 2: Installation and Configuration
30
See LAN Interface Settings (on page 110) for information in configuring
this section of the Network Settings page.
Note: In some environments, the default LAN Interface Speed & Duplex
setting Autodetect (autonegotiator) does not properly set the network
parameters, which results in network issues. In these instances, setting
the KX II-101-V2 LAN Interface Speed & Duplex field to 100 Mbps/Full
Duplex (or whatever option is appropriate to your network) addresses the
issue. See the Network Settings (on page 106) page for more
information.
Naming the Target Server
1. Attach the KX II-101-V2 to the target server.
2. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
3. Click the Port Name for the target server. The Port page opens.
4. Type a name, up to 32 alphanumeric and special characters.
5. Click OK.