User guide

Chapter 2: Installation and Configuration

E: Local User Port

The Local User port serves as a pass-through to the target server video

so that it connects directly to the monitor. The local keyboard and mouse

must be connected to target server directly.

For USB configurations, only the local video connects to the target server

at the Local User port. The keyboard and mouse connect directly to the

target server using USB ports.

Step 4: Configure the KX II-101-V2

Note: You must use a crossover cable between the KX II-101-V2 and

client if you are configuring the KX II-101-V2 through a web browser.

Configure the KX II-101-V2 Using the Remote Console

The KX II-101-V2 Remote Console is a web-based application that

enables you to configure the device prior to use and manage it after it

has been configured. Before configuring the KX II-101-V2 using the

Remote Console, you must have both your workstation and the device

connected to a network.

You can also use a terminal emulation program to configure the KX II-

101-V2. See Configure the KX II-101-V2 Using a Terminal Emulation

Program (Optional) (on page 32).

Setting a New Password

When you first log into the Remote Console, you are prompted to set a

new password to replace the default. Then you can configure the KX II-

101-V2.

1. Log into a workstation with network connectivity to your KX II-101-V2

device.

2. Launch a supported web browser such as Internet Explorer

(IE) or

Firefox

3. In the address field of the browser, enter the default IP address of

the device: 192.168.0.192.

4. Press Enter. The login page opens.

5. Enter the user name admin and the password raritan.

6. Click Login. The Change Password page is displayed.

7. Type raritan in the Old Password field.

8. Type a new password in the New Password field and the Confirm

New Password field. Passwords can be up to 64 characters long and

can consist of English alphanumeric and printable special

characters.