User guide

Chapter 2: Installation and Configuration
24
USB Configuration
To configure the KX II-101-V2 for use with a USB target server:
1. Use the attached video cable to connect the KX II-101-V2 to the
target video port.
2. Connect the USB connector of the KVM cable to the KX II-101-V2
and to a USB port on the target server.
3. Connect a monitor to the KX II-101-V2 Local User Port if you need to
use the local video. Optional
4. Connect the USB keyboard and mouse directly to the target.
Optional
Note: If you are using virtual media, you must use the USB
connection.
Diagram key for USB Connection
KX II-101-V2
Target server
Local monitor (optional)
Local mouse and keyboard (optional)