User guide

Chapter 8: Security Management
149
 Set the Encryption & Share to Auto on the Security Settings page.
See Encryption & Share.
Microsoft Client
 FIPS 140-2 should be enabled on the client computer and in Internet
Explorer.
To enable FIPS 140-2 on a Windows client:
1. Select Control Panel > Administrative Tools > Local Security Policy
to open the Local Security Settings dialog.
2. From the navigation tree, select Select Local Policies > Security
Options.
3. Enable "System Cryptography: Use FIPS compliant algorithms for
encryption, hashing and signing".
4. Reboot the client computer.
To enable FIPS 140-2 in Internet Explorer:
1. In Internet Explorer, select Tools > Internet Options and click on the
Advanced tab.
2. Select the Use TLS 1.0 checkbox.
3. Restart the browser.
Configuring IP Access Control
Using IP access control, you can control access to your KX II-101-V2. By
setting a global Access Control List (ACL) you are by ensuring that your
device does not respond to packets being sent from disallowed IP
addresses.
Important: IP address 127.0.0.1 is used by the KX II-101-V2 local
port. When creating an IP Access Control list, if 127.0.0.1 is within
the range of IP addresses that are blocked, you will not have access
to the KX II-101-V2 local port.
To use IP access control:
1. Open the IP Access Control page by selecting Security > IP Access
Control. The IP Access Control page opens.
2. Select the Enable IP Access Control checkbox to enable IP access
control and the remaining fields on the page.
3. Choose the Default Policy. This is the action taken for IP addresses
that are not within the ranges you specify.
 Accept - IP addresses are allowed access to the KX II-101-V2
device.