User guide

Chapter 6: Device Management
126
Port Configuration
The Port Configuration page displays a list of the KX II-101-V2 ports.
Ports connected to KVM target servers or power strips are displayed in
blue and can be edited.
To change a port configuration:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
Sorting
This page is initially displayed in port number order, but can be sorted on
any of the fields by clicking on the column heading.
 Port Name - The name assigned to the port. A port name displayed
in black indicates that you cannot change the name and that the port
cannot be edited; port names displayed in blue can be edited.
Note: Do not use apostrophes for the Port Name.
 Port Type - The type of target connected to the port:
Port type
Description
PowerStrip
Power strip/PDU
KVM
KVM target
To edit a port name:
1. Click the Port Name for the port you want to edit.
 For KVM ports, the Port page opens. In this page, you can name
the ports, create power associations, and set target server
settings.
 For power strips, the Port page for power strips opens. In this
page, you can name the power strips and their outlets. See
Power Control (on page 128).
Note: The Power Port 1 link is enabled only when a Raritan power
strip is connected to the KX II-101-V2 and configured. Otherwise, the
link is disabled.