User guide

Chapter 6: Device Management
114
c. Authentication Protocol - the MD5 or SHA authentication
protocol used by the SNMP v3 agent
d. Authentication Passphrase - the passphrase required to access
the SNMP v3 agent (up to 64 characters)
e. Privacy Protocol - if applicable, the AES or DES algorithm used
to encrypt PDU and context data
f. Privacy Passphrase - the passphrase used to access the privacy
protocol algorithm (up to 64 characters)
6. Click OK to start the SNMP agent service.
Configure SNMP traps on the Event Management - Settings page, which
can be quickly accessed by clicking the SNMP Trap Configuration link.
See Configuring SNMP Traps for information on creating SNMP traps
and List of KX II-101-V2 SNMP Traps for a list of available KX II-101-V2
SNMP traps.
The events that are captured once an SNMP trap is configured are
selected on the Event Management - Destination page. See Configuring
Event Management - Destinations.
To reset to factory defaults:
 Click Reset To Defaults. All items on the page are set back to their
defaults.
WARNING: When using SNMP traps over UDP, it is possible for the
KX II-101-V2 and the router that it is attached to fall out of
synchronization when the KX II-101-V2 is rebooted, preventing the
reboot completed SNMP trap from being logged.