User guide

User Management
52
Modify Existing User
¾ To modify an existing user:
1. IntheUserpage,changetheappropriatefields.(RefertoAddNew
User(onpage50)forin
formationabouthowtogetaccesstheUser
page.)
2. ClickOK.
Blocking and Unblocking Users
Auserʹsaccesstothesystemcanbeblockedbytheadministratoror
automaticallyblockedbasedonsecuritysettings.SeeUserBlocking(on
page147)forinform
ation.Ablockeduserbecomesinactiveandcanbe
unblockedbybeingmadeactiveagainbytheadministrator.
¾ To block or unblock a user:
1. ChooserUserManagement>User.
TheUserpageappears.
2. SelectordeselecttheActivecheckbox.
 Ifselected,theuserismadeactiveandgivenaccesstotheKX
II‐10
1.
 Ifdeselected,theuserismadeinactiveandcannotaccesstheKX
II‐101.
3. ClickOK.
Theuserʹsactivestatusisupdated.