User guide

Chapter 3: Installation and Configuration
23
10. ClickOK.ThePortAccesspageopens.
Assigning an IP Address
1. IntheKXII‐101RemoteConsole,chooseDeviceSettings>Network
Settings.TheNetworkBasicSettingspageopens.

2. IntheDeviceNamefield,specifyameaningfulnameforyourKX
II‐101unit;upto16alphanumericandspecialcharacters,nospaces.
3. SelecttheIPconfigurationfromtheIPautoconfiguration
drop‐downlist:
 None(StaticIP).Thisisthedefaultandrecommendedoption
becausetheDominionKXII‐101isaninf
rastructuredeviceand
itsIPAddressshouldnotchange.Thisoptionrequiresthatyou
manuallyspecifythenetworkparameters.
 DHCP.Withthisoption,networkparametersareassignedbythe
DHCPservereachtimetheKXII‐101isbooted.
Configuring Direct Port Access
¾ To configure direct port access:
1. ChooseDeviceSettings>DeviceServices.TheDeviceServicespage
appears.
2. SelecttheEnableDirectPortAccessviaURLcheckbox.