User guide

Chapter 3: Installation and Configuration

Using the Local User Port

TheKXII‐101isavailablewithoptionalvideoandPS/2cablesthat

enableyoutoattachakeyboardandmousetothetargetserverthrough

theLOCALUSERport.TheLOCALUSERportservesasapass‐through

tothetargetservertowhichtheKXII‐101isattachedandha

snoother

purpose.TheKXII‐101mustbepoweredontousetheLOCALUSER

port.

Note:OnlyPS/2hostinterfaceconnectivityissupportedonthelocalport

andyoumustrestartthetargetserverafterconnectingtoKXII‐101using

PS/2connectors.

Configuring Network Firewall Settings

ToaccesstheKXII‐101throughanetworkfirewall,yourfirewallmust

allowcommunicationonTCPPort5000.Alternatively,theKXII‐101can

beconfiguredtouseadifferentTCPportofyourowndesignation.

InordertotakeadvantageofKXII‐101ʹsweb‐accesscapabilities,the

firew

allmustallowinboundcommunicationonTCPPort443‐the

standardTCPportforHTTPScommunication.Inordertotake

advantageofKXII‐101ʹsredirectionofHTTPrequeststoHTTPS(sothat

usersmaytypethemorecommon,ʺhttp://xxx.xxx.xxx.xxxʺ,insteadof

ʺhttps://xxx.xxx.xxx.xxxʺ),thefirewallmustalsoa

llowinbound

communicationonTCPPort80‐thestandardTCPportforHTTP

communication.

Configuring the KX II-101

TheKXII‐101canbeconfiguredintwoways:

• Usingtheweb‐basedKXII‐101RemoteConsole,whichrequiresthe

unittohaveanetworkconnectiontoyourworkstation.

• UsingaterminalemulationprogramlikeHyperTerminal,which

requiresadirectconnectionfromtheunitʹsADMINporttoyour

workstation

.ThecableforthisconnectionisincludedwiththeKX

II‐101.

ThissectiondescribesbothwaysofconfiguringtheKXII‐101.