User guide

Chapter 3: Installation and Configuration

Linux Settings

OnatargetserverrunningLinuxgraphicalinterfaces,setthemouse

accelerationtoexactly1andsetthresholdtoexactly1.

Asmentionedabove,pleaseensurethatatargetserverrunningLinuxis

usingaresolutionsupportedbyKXII‐101atastandardVESAresolution

andrefreshrate.ALinuxta

rgetservershouldalsobesetsotheblanking

timesarewithin+/‐40%ofVESAstandardvalues.

¾ To check for these parameters:

1. GototheXfree86ConfigurationfileXF86Config.

2. Usingatexteditor,disableallnon‐KXII‐101supportedresolutions.

3. Disablethevirtualdesktopfeature,whichisnotsupportedbyKX

II‐10

1.

4. Checkblankingtimes(+/‐40%ofVESAstandard).

5. Restartcomputer.

Note:InmanyLinuxgraphicalenvironments,thecommandCtrl+Alt++

(plussign)changesthevideoresolution,scrollingthroughallavailable

resolutionsthatremainenabledintheXF86Configfile.

Sun Solaris Settings

ASolaristargetservermustbeconfiguredtooneofthedisplay

resolutionssupportedbytheKXII‐101.Themostpopularsupported

resolutionsforSunmachinesare:

1024x768@60Hz

1024x768@70Hz

1024x768@75Hz

1024x768@85Hz

1280x1024@60Hz

AtargetserverrunningtheSolarisoperatingsystemmustoutputVGA

video(H‐and‐Vsync,notcompositesyn

c).TochangeyourSunvideo

cardoutputfromcompositesynctothenon‐defaultVGAoutput,first

issuetheStop+Acommandtodroptobootprommode.Then,issuethe

command:

#eepromoutput‐device=screen:r1024x768x75