User guide

CLI Commands
172
Interface Command Example
ThefollowingcommandsetstheIPaddress,mask,andgateway
addresses,andsetsthemodetoautodetect.
Admin Port > Config > Network > interface ipauto none ip
192.168.50.12 mask 255.255.255.0 gw 192.168.51.12 mode
auto
Listports Command
TheListportscommandliststhenumberofactiveusers,usernames,
port,andstatus.
Listports Command Example
Admin Port > listports
Port Port Port Port Port
No. Name Type Status Availability
1 - Dominion_KXII-101_Port KVM up idle
Userlist Command
TheUserlistcommandliststheport,portname,porttype,portstatus,
andportavailability.
Userlist Command Example
Admin Port > Userlist
Active user number: 1
User Name | From | Status
------------------------------------------------------
--
admin | Admin Port | active