User guide

Accessing the KX II-101 Using the CLI
164
Accessing the KX II-101 Using the CLI
AccesstheKXII‐101byusingoneofthefollowingmethods:
• TELNETviaIPconnection
• SSH(SecureShell)viaIPconnection
• Multi‐functionadminserialportviaRS‐232serialinterfacewith
providedcableandaterminalemulationprogramlike
HyperTerminal
AnumberofSSH/TELNETclientsareav
ailableandcanbeobtained
fromthefollowinglocations:
• Putty‐http://www.chiark.greenend.org.uk/~sgtatham/putty/
(http://www.chiark.greenend.org.uk/
~sgtatham/putty/)
• SSHClientfromssh.com‐www.ssh.com(http://www.ssh.com)
• AppletSS
HClient‐www.netspace.org/ssh
(http://www.netspace.org/ssh)
• OpenSSHClient‐ww
w.openssh.org(http://www.openssh.org)
Note:Acc
essingtheCLIbySSHorTELNETrequiresyoutosetupaccess
intheDeviceServicespageoftheKXII‐101RemoteClient.SeeDevice
Services  (onpage120)forinform
ation.
SSH Connection to the KX II-101
UseanySSHclientthatsupportsSSHv2toconnecttoit.Youmust
enableSSHaccessfromtheDevicesServicespage.SeeDeviceServices
(onpage120)forinfo
rmation.
Note:Forsecurityreasons,SSHV1connectionsarenotsupportedbythe
KXII‐101.
SSH Access from a Windows PC
¾ To open an SSH session from a Windows PC:
1. LaunchtheSSHclientsoftware,suchasPuTTY.
2. EntertheIPaddressoftheKXII‐101server192.168.0.192.
3. ChooseSSH,whichusesthedefaultconfigurationport22.
4. ClicktheOpenbutton.
5. Thefollowingpromptappears:
login as: