User guide

Chapter 3: Installation and Configuration
9
Setting Server Video Resolution
Foroptimalbandwidthefficiencyandvideoperformance,atargetserver
runningagraphicaluserinterfacesuchasWindows,X‐Windows,
Solaris,andKDEshouldbeconfiguredwithdesktopbackgroundssetto
apredominantlysolid,light‐coloredgraphic.Backgroundsfeaturing
photosorcomplexgradientsshouldbe avoided.
Ensurethattheserverʹsvid
eoresolutionandrefreshratearesupported
byKXII‐101,andthatthesignalisnon‐interlaced.KXII‐101supportsthe
followingvideoresolutions:

TextModes
640x480@60Hz
640x480@72Hz
640x480@75Hz
640x480@85Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75
Hz
800x600@85Hz

1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1024x768@85Hz
1152x864@60Hz
1152x864@75Hz
1280x1024@60Hz
1600x1200@60Hz


Setting Sun Video Resolution
Sunsystemshavetworesolutionsettings,acommandlineresolution
andaGUIresolution.Forinformationabouttheresolutionssupported
bytheKXII‐101,seeSettingServerVideoResolution(onpage9).
Note:Ifnoneofthesupportedreso
lutionswork,makesurethemonitor
ismulti‐sync.SomemonitorswillnotworkwithanH&Vsync.
Command Line Resolution
¾ To check the command line resolution:
• Runthefollowingcomm andasroot:
# eeprom output-device