User guide

Backup and Restore
158
4. ClickClose.Thebackupfileissavedlocallyonyourclientmachine
withthenameandlocationspecified.
¾ To restore your KX II-101:
WARNING:PleaseexercisecautionwhenrestoringyourKXII‐101to
anearlierversion.Usernamesandpasswordinplaceatthetimeofthe
backupwillberestored.Ifyoudonotremembertheold
administrativeusernamesandpasswords,youwillbelockedoutof
theKXII‐101.

Inaddition,ifyouusedadifferentIPAddressatthetimeofthe
backup,thatIPAddresswillberestoredaswell.Iftheconfiguration
usesDHCP,youmaywanttoperformthisoperationonlywhenyou
haveaccesstothelocalporttochecktheIPaddressaftertheupdate.
1. Choosethetypeofrestoreyouwanttorun:
 FullRestore.Acompleterestoreoftheentiresystem;generally
usedfortraditionalbackupandrestorepurposes.
 ProtectedRestore.Everythingisrestoredexceptdevice‐specific
informationsuchasserialnumber,MACAddress,IPAddress,
name,etc.Withthisoption,yo
ucansetuponeKXII‐101and
copytheconfigurationtomultipleKXII‐101devices.
 CustomRestore.Withthisoption,youcanselectUserandGroup
Restore,DeviceSettingsRestore,orboth.Selecttheappropriate
checkboxes:
 UserandGroupRestore.Thisoptionincludesonlyuserand
groupinform
ation.Usethisoptiontoquicklysetupuserson
adifferentKXII‐101.
 DeviceSettingsRestore.Thisoptionincludesonlydevice
settings.Usethisoptiontoquicklycopythedevice
information.
2. ClicktheBrowsebutton.AChooseFiledialogopens.
3. Navigatetoandselectthea
ppropriatebackupfileandclickOpen.
ThefileselectedislistedintheRestoreFilefield.
4. ClickRestore.Theconfiguration(basedonthetypeofrestore
selected)isrestored.