User guide

Chapter 8: Device Management
127
4. TypetheAgentCommunityString(theDominionunitʹsstring).An
SNMPcommunityisthegroupthatdevicesandmanagement
stationsrunningSNMPbelongto;ithelpsdefinewhereinformation
issent.Thecommunitynameisusedtoidentifythegroup;anSNMP
deviceoragentmaybelongtomorethanoneSN
MPcommunity.
5. SpecifywhetherthecommunityisRead‐OnlyorRead‐Writeusing
theTypedrop‐downlist.
6. ConfigureuptofiveSNMPmanagersbyspecifyingtheirDestination
IP,Port#,andCommunity.
7. ClicktheClickheretoviewtheKXII‐101SNMPMIBlinktoacce
ss
theSNMPManagementInformationBase.
8. ClickOK.
Syslog Configuration

¾ To configure the Syslog (enable Syslog forwarding):
1. ChoosetheEnableSyslogForwardingoptiontologthedeviceʹs
messagestoaremoteSyslogserver.
2. TypetheIPAddressofyourSyslogserverintheIPAddressfield.
3. ClickOK.
¾ To cancel without saving changes:
• ClickCancel.
¾ To reset to factory defaults:
• ClicktheResetToDefaultsbutton.