User guide

Chapter 8: Device Management
119
Note:Occasionallythereareproblemsrunningat10Mbpsineither
halforfullduplex.Ifyouareexperiencingproblems,pleasetry
anotherspeedandduplex.
PleaserefertoNetworkSpeedSettingsformoreinformation.
• BandwidthLimit.Selectamongthebandwidthlimitsavailable.
 128Kilobit
 256Kilobit
 512Kilobit
 2Megabit
 5Megabit
 10Megabit
 100Megabit
 NoLimit
• SetSystemACL.Clickthisbuttontosetagl
obal‐levelAccess
ControlListforyourKXII‐101byensuringthatyourdevicedoesnot
respondtopacketsbeingsentfromdisallowedIPaddresses.TheIP
AccessControl(onpage151)pa
geopens.
Note:TheseACLvaluesareglobal,affectingtheKXII‐101unitasa
whole.YoucanalsocreateACLsonagroup‐levelbasis.Forexample,
youcancreatean “OutsourcedVendors＂ usergroupthatispermitted
toaccessKXII‐101onlyfromagivenIPaddressrange(referto
Group‐basedIPACLformoreinformationonhowtocreate
group‐specif
icAccessControlLists).