User guide

Chapter 8: Device Management
117
• DeviceName.Typeauniquenameforthedevice(upto16
characters;spacesarenotallowed).Nameyourdevicesoyoucan
easilyidentifyit.ThedefaultnameforaKXII‐101unitis:
“DKX2‐101”.Remoteuserswillalsoseethisname.However,ifan
MPCuserhascre
atedaConnectionProfileforthisdevice,thatuser
willseetheDescriptionfieldfromtheProfileinstead.
• IPautoconfiguration.Selectfromamongtheoptionsavailableinthe
drop‐downlist:
 None.UsethisoptionifyoudonotwantanautoIP
configurationandprefertosettheIPAd
dressyourself(static
IP).Thisisthedefaultandrecommendedoption.
IfthisoptionisselectedfortheIPautoconfiguration,thefollowing
NetworkBasicSettingsfieldsareenabled,allowingyoutomanually
settheIPconfiguration.
 IPAddress.ThedefaultIPAddressis192.168.0.192.
 SubnetMask.Thedefaultsubnetmaskis255.255.255.0.
 GatewayIPAddress.TheIPAddressforthegateway(ifone
isused).
 PrimaryDNSServerIPAddress.TheprimaryDomainName
ServerusedtotranslatenamesintoIPAddresses.
 Second
aryDNSServerIPAddress.ThesecondaryDomain
NameServerusedtotranslatenamesintoIPAddresses(if
oneisused).
 DHCP.DynamicHostConfigurationProtocolisusedby
networkedcomputers(clients)toobtainuniqueIPaddressesand
otherparametersfromaDHCPserver.
IfDHCPisused,enterthePrefe
rredhostname(DHCPonly).Upto63
characters.