User guide

Chapter 7: Virtual Media
109
4. ClickConnect.Themediawillbemountedonthetargetserver
virtually.Youcanaccessthemediajustlikeanyotherdrive.
Note:IfthereisnoUSBconnectiontothetargetserver,youwillseea
warningmessagethatsays,ʺThevirtualmediacapabilityissetup
butwillnotbeavailableuntiltheUSBcableisconnectedorthe
targetispoweredon.PleasecheckyourUSBconnectivityorseeif
thetargetispoweredon.ʺResolvethisissue,thenconnecttothe
driveagain.
Conditions when Read-Write is not Available
Virtualmediaread‐writeisnotavailableinthefollowingsituations:
• Forallharddrives.
• Whenthedriveiswrite‐protected.
• Whentheuserdoesnothaveread‐writepermission:
 PortPermissionAccessissettoNoneorView
 PortPermissionVMAccessissettoRe
ad‐OnlyorDeny