User guide

Chapter 3: Working with Target Servers
55
To power off a target server:
1. From the Dominion KX II Remote Console, click the Port Access tab
to open it. The Port Access page opens.
2. Click the port name of the appropriate target server. The Port Action
menu appears.
3. Choose Power Off. A confirmation message appears.
Disconnecting KVM Target Servers
Note: This item is not available on the Dominion KX II Local Console.
The only way to disconnect from the switched target in the Local Console
is to use the hot key.
To disconnect a target server:
1. Click the port name of the target you want to disconnect. The Port
Action menu appears.
2. Choose Disconnect.
Tip: You can also close the Virtual KVM Client window by selecting
Connection > Exit from the Virtual KVM menu.