User guide

Appendix D: FAQs
332
Yes. PDU-level power statistics, including power, current and voltage,
are retrieved from the PDU and displayed to the user.
Does remote power control require any special server
configuration?
Some servers ship with default BIOS settings such that the server does
not automatically restart after losing and regaining power. For these
servers, see the server‟s documentation to change this setting.
What happens when I recycle power to a server?
This is the physical equivalent of unplugging the server from the AC
power line, and reinserting the plug.
Can I power on/off other equipment (non-servers) connected to a
PDU?
Yes. You can power on/off other equipment attached to the PDU by
outlet from the Dominion KX II‟s browserbased interface.
What type of power strips does the Dominion KX II support?
To take advantage of the Dominion KX II's integrated power control user
interface, and more importantly, integrated security, use Raritan's
Remote Power Control (RPC) power strips. RPCs come in many outlet,
connector, and amp variations. The D2CIM-PWR must be purchased to
connect the RPC to the Dominion KX II.