User guide

Chapter 2: Installation and Configuration

Video Settings (GUI)

The GUI resolution can be checked and set using different commands

depending on the video card in use. Run these commands from the

command line.

Note: 1024x768x75 is used as an example here; substitute the resolution

and refresh rate you are using.

Card

To check resolution:

To change resolution:

32-bit

# /usr/sbin/pgxconfig -prconf

1. # /usr/sbin/pgxconfig -res

1024x768x75

2. Log out or restart computer.

64-bit

# /usr/sbin/m64config -prconf

1. # /usr/sbin/m64config -res

1024x768x75

2. Log out or restart computer.

32-bit

and

64-bit

# /usr/sbin/fbconfig -prconf

1. # /usr/sbin/fbconfig -res

1024x768x75

2. Log out or restart computer.

IBM AIX 5.3 Settings

Follow these steps to configure KVM target servers running IBM

AIX

™

5.3.

To configure the mouse:

1. Go to Launcher.

2. Choose Style Manager.

3. Click Mouse. The Style Manager - Mouse dialog appears.

4. Use the sliders to set the Mouse acceleration to 1.0 and Threshold to

1.0.

5. Click OK.

To configure the video:

1. From the Launcher, select Application Manager.

2. Select System_Admin.

3. Choose Smit > Devices > Graphic Displays > Select the Display

Resolution and Refresh Rate.

4. Select the video card in use.

5. Click List. A list of display modes is presented.