User guide

Appendix C: Informational Notes
298
2. Either comment out this line (using #) or delete it completely.
3. Restart the X server.
With this change, the internal video mode timing from the X server will be
used and will correspond exactly with the VESA video mode timing,
resulting in the proper video display on the Dominion KX II.
Supported Video Resolutions Not Displaying
When using a CIM, there are some video resolutions, as listed in
Supported Video Resolutions (on page 274), that may not be available
to you for selection by default.
To view all available video resolutions if they do not appear:
1. Plug the monitor in.
2. Next, unplug the monitor and plug in the CIM. All video resolutions
will not be available and can be used.
USB Ports and Profiles
VM-CIMs and DL360 USB Ports
HP
®
DL360 servers have one USB port on the back of the device and
another on the front of the device. With the DL360, both ports cannot be
used at the same time. Therefore, a dual VM-CIM cannot be used on
DL360 servers.
However, as a workaround, a USB2 hub can be attached to the USB port
on the back of the device and a dual VM-CIM can be attached to the
hub.
Help for Choosing USB Profiles
When you are connected to a KVM target server in VKC, you can view
information about USB profiles via the Help on USB Profiles command
on the USB Profile menu.