User guide

Chapter 8: Device Management
160
Connecting a Power Strip
Raritan PX series power strips are connected to the KX II using the
D2CIM-PWR CIM.
To connect the power strip:
1. Connect the male RJ-45 of the D2CIM-PWR to the female RJ-45
connector on the serial port of the power strip.
2. Connect the female RJ-45 connector of the D2CIM-PWR to any of
the available female system port connectors on the KX II using a
straight through Cat5 cable.
3. Attach an AC power cord to the target server and an available power
strip outlet.
4. Connect the power strip to an AC power source.
5. Power on the device.