User guide

Chapter 8: Device Management
158
8. Click OK.
Configuring KVM Switches
The Dominion KX II also supports use of hot key sequences to switch
between targets. In addition to using hot key sequences with standard
servers, KVM switching is supported by blade chassis and in tiered
configurations.
To configure KVM switches:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
2. Click the Port Name of the target server you want to rename. The
Port Page opens.
3. Select KVM Switch.
4. Select the KVM Switch Model.
Note: Only one switch will appear in the drop-down.
5. Select KVM Switch Hot Key Sequence.
6. Enter the Maximum Number of Target Ports (2-32).
7. In the KVM Switch Name field, enter the name you want to use to
refer to this port connection.