User guide

Chapter 8: Device Management
138
Enabling SSH
Enable SSH access to allow administrators to access the Dominion KX II
via the SSH v2 application.
To enable SSH access:
1. Choose Device Settings > Device Services. The Device Service
Settings page appears.
2. Select Enable SSH Access.
3. Enter the SSH Port information. The standard SSH TCP port number
is 22 but the port number can be changed to provide a higher level of
security operations.
4. Click OK.
HTTP and HTTPS Port Settings
You are now able to configure HTTP and/or HTTPS ports used by the
Dominion KX II. For example, if you are using the default HTTP port 80
for another purpose, changing the port will ensure the Dominion KX II
does not attempt to use it.
To change the HTTP and/or HTTPS port settings:
1. Choose Device Settings > Device Services. The Device Service
Settings page appears.
2. Enter the new ports in the HTTP Port and/or HTTPS Port fields.
3. Click OK.
Entering the Discovery Port
The Dominion KX II discovery occurs over a single, configurable TCP
Port. The default is Port 5000, but you can configure it to use any TCP
port except 80 and 443. To access the Dominion KX II from beyond a
firewall, your firewall settings must enable two-way communication
through the default Port 5000 or a non-default port configured here.
To enable the discovery port:
1. Choose Device Settings > Device Services. The Device Service
Settings page appears.
2. Enter the Discovery Port.
3. Click OK.