User guide

Chapter 7: User Management
112
Setting Permissions
Important: Selecting the User Management checkbox allows the
members of the group to change the permissions of all users,
including their own. Carefully consider granting these permissions.
Permission
Description
Device Access
While Under
CC-SG
Management
Allows users and user groups with this
permission to directly access the Dominion KX
II using an IP address when Local Access is
enabled for the device in CC-SG. The device
can be accessed from the Local Console,
Remote Console, MPC, VKC, and AKC.
When a device is accessed directly while it is
under CC-SG management, access and
connection activity is logged on the Dominion
KX II. User authentication is performed based
on Dominion KX II authentication settings.
Note: The Admin user group has this
permission by default.
Device Settings
Network settings, date/time settings, port
configuration (channel names, power
associations), event management (SNMP,
Syslog), virtual media file server setups.
Diagnostics
Network interface status, network statistics,
ping host, trace route to host, Dominion KX II
diagnostics.
Maintenance
Backup and restore database, firmware
upgrade, factory reset, reboot.
Modem Access
Permission to use the modem to connect to the
Dominion KX II device.
PC-Share
Simultaneous access to the same target by
multiple users.
If you are using a tiered configuration in which
a base Dominion KX II device is used to access
multiple other tiered devices, all devices must
share the same PC-Share setting. See
Configuring and Enabling Tiering (on page
139) for more information on tiering.
Security
SSL certificate, security settings (VM Share,
PC-Share), IP ACL.