User guide

Chapter 3: Working with Target Servers
52
2. Click the port name of the appropriate target server. The Port Action
menu is displayed.
3. Choose Power Off. A message is displayed confirming the action
taken.
Disconnecting KVM Target Servers
Note: This item is not available on the Dominion KX II Local Console; the
only way to disconnect from the switched target in the Local Console is
to use the hot key.
To disconnect a target server:
1. Click the port name of the target you want to disconnect. The Port
Action menu is displayed.
2. Choose Disconnect on the Port Action menu.
Tip: You can also close the Virtual KVM Client window by selecting
Connection > Exit from the Virtual KVM menu.
Choosing USB Profiles
When you connect to a KVM target server for the first time, as described
in Connecting to a KVM Target Server (on page 49), the preferred
USB profile fo
r the port is automatically used. If you have connected to
the target server previously using a different profile, the USB profile from
the last connection is used. You are alerted to the use of a profile other
than the preferred profile by a warning like the following:
After you have connected to a target server, you can change the USB
profile as necessary. By default, the profiles that appear under the USB
Profile menu in the VKC are those that you are most likely to use. These
profiles have been preselected by the administrator for use with the
connected target server depending on your operational requirements.
However, all profiles are available to be selected via the Other Profiles
option on the USB Profile menu.
To choose a USB profile:
1. Connect to a KVM target server as described in Connecting to a
KVM Target Server (on page 49).