User guide

Chapter 2: Installation and Configuration

Apple Macintosh Settings

For KVM target servers running an Apple Macintosh operating system,

the preferred method is to use the D2CIM-VUSB and Absolute Mouse

Synchronization.

Note: Enable the "Absolute Mouse Scaling for the Mac server" option on

the Dominion KX II Port page.

Step 4 (Optional): Configure Keyboard Language

Note: This step is not required if you are using the US/International

language keyboard.

If you are using a non-US language, the keyboard has to be configured

for the appropriate language. In addition, the keyboard language for the

client machine and the KVM target servers has to match.

Consult the documentation for your operating system for additional

information about changing the keyboard layout.

Change the Keyboard Layout Code (Sun Targets)

Use this procedure if you are using a DCIM-SUSB and would like the

keyboard layout changed to another language.

To change the keyboard layout code (DCIM-SUSB only):

1. Open a Text Editor window on the Sun workstation.

2. Check that the Num Lock key is active and press the left Ctrl key and

the Del key on your keyboard. The Caps Lock light starts to blink,

indicating that the CIM is in Layout Code Change mode. The text

window displays: Raritan Computer, Inc. Current

keyboard layout code = 22h (US5 UNIX).

3. Type the layout code desired (for example, 31 for the Japanese

keyboard).

4. Press Enter.

5. Shut down the device and power on once again. The DCIM-SUSB

performs a reset (power cycle).

6. Verify that the characters are correct.