User guide

Chapter 2: Installation and Configuration
20
Character Description Character Description
% Percent sign @ At sign
& Ampersand [ Left bracket
( Left parenthesis \ Backward slash
) Right parenthesis ] Right bracket
* Asterisk ^ Caret
+ Plus sign _ Underscore
, Comma ` Grave accent
- Dash { Left brace
. Period | Pipe sign
/ Forward slash } Right brace
< Less than sign ~ Tilde
: Colon
Specifying Power Supply Autodetection
The Dominion KX II provides dual power supplies and can automatically
detect and provide notification regarding the status of these power
supplies. Proper configuration ensures that the Dominion KX II sends the
appropriate notifications should a power supply fail.
The Power Supply Setup page is configured to automatically detect both
power supplies when two power supplies are used. If only one power
supply is used in your configuration, you can disable automatic detection
from the Power Supply Setup page.
To disable power supply autodetection for the power supply not
in use:
1. Using the Dominion KX II Local Console, choose Device Settings >
Power Supply Setup. The Power Supply Setup page opens.
2. Clear autodetection for the power supply that you are not using.
For more information, see Power Supply Setup Page (on page 187).