User guide

Chapter 11: Command Line Interface (CLI)
235
Access Telnet from a Windows PC
To open a Telnet session from a Windows PC:
1. Choose Startup > Run.
2. Type Telnet in the Open text box.
3. Click OK. The Telnet page opens.
4. At the prompt enter the following command: Microsoft Telnet>
open <IP address> where <IP address> is the Dominion KX II IP
address.
5. Press the Enter key. The following message appears: Connecting
To <IP address>... The login as prompt appears.
See Logging On (on page 235) for details.
Note: Both IPv4 an
d IPv6 a
ddresses are supported.
Logging On
To log on, enter the user name admin as shown:
1. Login as admin
2. The Password prompt appears. Enter the default password: raritan
The welcome message displays. You are now logged on as an
administrator.