User guide

Chapter 7: Device Management
190
Note: Do not use apostrophes for the Port (CIM) Name.
 Port Type - The type of CIM connected to the port:
Port type Description
DCIM Dominion CIM
Not Available No CIM connected
PCIM Paragon CIM
PowerStrip Power CIM
VM Virtual Media CIM (D2CIM-VUSB and
D2CIM-DVUSB)
2. Click the Port Name for the port you want to edit.
 For KVM ports, the Port page is opened. From this page, you can
name the ports and create power associations.
 For power strips, the Port page for power strips is opened. From
this page, you can name the power strips and their outlets. name
the power strips and their outlets.
Power Control
Connect the Power Strip
To connect the power strip:
1. Connect the male RJ-45 of the D2CIM-PWR to the female RJ-45
connector on the power strip.
2. Connect the female RJ-45 connector of the D2CIM-PWR to any of
the available female system port connectors on the Dominion KX II
using a straight through Cat 5 cable.
3. Attach an AC power cord to the target server and an available power
strip outlet.
4. Connect the power strip to an AC power source.