User guide

10
In This Chapter
Overview..................................................................................................10
Default Logon Information .......................................................................
10
Getting Started ........................................................................................11
Step 1: Connec
t the Equipment ..............................................................11
Step 2: Dominion KX II Initial Configuration
............................................14
Step 3: Configure KVM Target Servers...................................................22
Step 4 (Optional): Configure Keyboard Language..................................34
Step 5: Configure Net
work Firewall Settings...........................................
35
Overview
This section provides a brief overview of the installation process. Each
step is further detailed in the remaining sections of this chapter.
To install and configure the Dominion KX II:
• Step 1: Connect the Equipment (on page 11)
• Step 2: Dominion KX II Ini
tial Configuration (on page 14)
• Step 3: Con
figure KVM Target Servers (on page 22)
• Step 4 (Opti
onal): Configure Keyboard Language (on page 34)
• Step 5: Con
figure Network Firewall Settings (on page 35)
Also includ
ed in this section is the default logon information you will
need. Specifically, the default IP address, user name, and password.
See Default Logon Information (on page 10).
Default Logon Information
Default Value
User name The default user name is admin. This user has
administrative privileges.
Password The default password is raritan.
Passwords are case sensitive and must be entered
in the exact case combination in which they were
created. For example, the default password raritan
must be entered entirely in lowercase letters.
The first time you start the Dominion KX II, you are
required to change the default password.
Chapter 2
Installation and Configuration