User guide

Chapter 7: Device Management
187
Power Supply Setup Page
The Dominion KX II provides dual power supplies, and can automatically
detect and provide notification regarding the status of these power
supplies. Use the Power Supply Setup page to specify whether you are
using one or both of the power supplies. Proper configuration ensures
that the Dominion KX II sends the appropriate notifications should a
power supply fail. For example, if power supply number one fails, the
power LED at the front of the unit will turn red.
To enable automatic detection for the power supplies in use:
1. Choose Device Settings > Power Supply Setup. The Power Supply
Setup page opens.
2. If you are plugging power input into power supply number one (left-
most power supply at the back of the unit), then select the Powerln1
Auto Detect option.
3. If you are plugging power input into power supply number two (right-
most power supply at the back of the unit), then select the Powerln2
Auto Detect option.
4. Click OK.