User guide

Chapter 1: Introduction
9
Package Contents
Each Dominion KX II ships as a fully-configured stand-alone product in a
standard 1U (2U for KX2-464) 19" rackmount chassis. Each Dominion
KX II device ships with the following contents:
Amount
included
Item
1 Dominion KX II device
1 Dominion KX II quick installation and setup guide
1 Raritan user guide CD-ROM
1 Rackmount kit
1 AC power cords
1 Cat5 network cable
1 Cat5 network crossover cable
1 Set of 4 rubber feet (for desktop use)
1 Application note
1 Warranty card
User Guide
The Dominion KX II User Guide provides the information to install, set up
and configure, access target servers and power strips, use virtual media,
manage users and security, and maintain and diagnose the Dominion KX
II.
Related Documentation
The Dominion KX II User Guide is also accompanied by a Dominion KX
II Quick Setup Guide, which can be found on the CD that accompanied
the device or on the Support page of Raritan's website on the Support
page (www.raritan.com). Additionally, installation requirements and
instructions for client applications used with the Dominion KX II can be
found in the KVM and Serial Client User Guide, which is also found on
the Raritan website. Where applicable, specific client functions used with
the Dominion KX II are included in this user guide.