User guide

Chapter 7: Device Management
176
 5 Megabit
 2 Megabit
 512 Kilobit
 256 Kilobit
 128 Kilobit
5. Click OK to apply the LAN settings.
Device Services
1. Choose Device Settings > Device Services. The Device Service
Settings page appears.
2. Enter the Discovery Port.
The Dominion KX II discovery occurs over a single, configurable TCP
Port. The default is Port 5000, but you can configure it to use any
TCP port except 80 and 443. To access the Dominion KX II from
beyond a firewall, your firewall settings must enable two-way
communication through the default Port 5000 or a non-default port
configured here.
3. Select Enable SSH Access to allow administrators to access the
Dominion KX II via the SSH v2 application.
4. Enter the SSH Port information.
The standard SSH TCP port number is 22 but the port number can
be changed to provide a higher level of security operations.